like a predator.
if you are Predator,you can read.
hh
mm
ss
supported 12/24 hour,and SDK2.0.
If it's ok with you,please try.
iOS
http://itunes.apple.com/us/app/dont-step-the-white-tile/id783246578?l=ja&ls=1&m
Android
http://play.google.com/store/apps/developer?id=fieldWalking&hl=en
Implementation of the SmartTime (http://www.mypebblefaces.com/apps/1421/1466/) concept using SmartWatch+ 2.0 JB source by Robert Hesse. Please note this face will not work unless you have SmartWatch+ installed and are jailbroken and using the 2.x firmware on your Pebble.
This version features some inverted colors that I prefer more but I wanted the original to reflect the original idea as closely as possible
show time with a 5 minutes accuraty, in French
The number of line is automagically adapted in fonction of the text to show (3 or 4 lines ).
You can personnalize the watch with somes options :
- Precise Minute : show the real minute in the upper right corner.
-Color : you can invert the color (like the 3rd picture).
-Battery : you can show the battery of the watch in the upper right corner
-Date : you can show/hide the date
This watchface is based on the Fuzzy French Plus watchface by mandla, and on the 91-Dub-v2.0 by orviwan for the configuration page.
pebble forum : http://forums.getpebble.com/discussion/10359/watchface-fuzzy-time-fr-sdk-2-0-with-optio
Just a taller version of another of my watchfaces. I've also removed the top line of icons. Supports 12 and 24hr time.
Inspired by the Citizen Eco Drive
made with http://www.watchface-generator.de/
Watchface with Anna from Disney's Frozen
Made with Watchface Generator
Welcome to my watchface. Press "Like" if you think it's good. Thank you.
Analog with date above 6 position. Thanks to http://www.watchface-generator.de/
DblTIme2 - display two timezones
[ SDK 2.0 compatible version ]
NOTE: to allow full use of the buttons, DblTime2 loads in as an app (at the same menu level as "Settings" on the Pebble), not as a watchface . . . it just displays a watchface
Features (v 2.2):
- dual date & time displays
- with black-on-white for daytime displays & white on black for nighttime displays
- adjustable # hours offset (-23:30 to +23:30) in 30-minute increments, between primary & secondary time displays (default = 0:00)
- when # hours offset = 0, secondary date & time are not displayed (primary time display only)
- enable/disable snooze mode (display blanks after 10 seconds) - default = enable
- enable/disable hourly chime mode (buzzes on the hour & activates display) - default = disable
- selectable mm/dd/yy vs dd/mm/yy date display - default = mm/dd/yy
- enable/disable display of seconds - default = enable
- displays 12/24 hour format time (using current Pebble Settings)
- minimal delay when showing time at start-up & when waking from snooze
- preference settings saved in persistent storage
Operating instructions:
- to enter "set mode" (snooze), long-press the "select" (middle) button (Z's blink)
- with "set mode" on "snooze", press the "up" & "down" buttons to toggle between "enable" & "disable"
- to change "set mode" to "chime", long-press the "select" button (bell blinks)
- with "set mode" on "chime", press the "up" & "down" buttons to toggle between "enable" & "disable"
- to change "set mode" to "month-day", long-press the "select" button (M/D blinks)
- with "set mode" on "month-day", press the "up" & "down" buttons to toggle between mm/dd/yy & dd/mm/yy
- to change "set mode" to "display seconds", long-press the "select" button (S blinks)
- with "set mode" on "display seconds", press the "up" & "down" buttons to toggle between "enable" & "disable"
- to change "set mode" to "offset", long-press the "select" button (TZ blinks)
- with "set mode" on "offset", press the "up" & "down" buttons to adjust the offset value by 30-minute increments
- with "set mode" on "offset", press the "select" button to force the offset back to 0
- to exit "set mode", long-press the "select" button (nothing blinking)
- with "snooze" mode activated (display blank), press the "up" or "down" buttons to repaint the display
Mark J Culross (KD5RXT)
[email protected]
update: will invert screen on connect/disconnect (no vibe), new bigger battery bar (see my website link for change animation), no seconds
Similar to my other '90 degrees' designs, however this has:
- 3 letter month
- no 0 in 12h mode
- re-positioned, bigger, realistic weather icons
- different bluetooth icon
Legendary soviet watch. Вотчфейс в духе легендарных советских, а потом и белорусских часов электроника (мелодия, интеграл), кто знает, тот поймет. Срисован не с определенной модели, а составлен из характерных элементов некоторых, чтобы просто узнавалось, ну и хорошо смотрелось на экране. Наконец-то приобрел pebble и отладил приложение.
Legendary soviet watch. Вотчфейс в духе легендарных советских, а потом и белорусских часов электроника (мелодия, интеграл), кто знает, тот поймет. Срисован не с определенной модели, а составлен из характерных элементов некоторых, чтобы просто узнавалось, ну и хорошо смотрелось на экране. Наконец-то приобрел pebble и отладил приложение.
A Simple watch face with time / date / day and a bluetooth disconnect vibration
This is a major update to this application. It now includes persistent storage, a setup menu, new options, 100 lap storage and loads of improvements.
The old description still applies and is here (with updates for this version):
This started out as a desire to have a stopwatch I could read while swimming. Nothing out there had a font large enough to see when glanced at during a tumble turn. It has grown into something a bit more than just that. There are four display options; a) the main window, b) a large font view of the current lap, c) a watch view that includes the last two lap times and d) a scrolling list of all the lap times. There is also an optional vibration on 30 sec, 1, 2, 3, 4, 5 or 10 min boundaries (also useful as a general reminder function - I use it for this all the time).
The button functions are:
Top (short) = toggle the face between "normal", "large" & "watch".
Top (long) = reset the timer and clear the lap times.
Middle (short) = start/stop timer.
Middle (long) = set the vibration mode, either off or at the indicated time period.
Bottom (short) = lap marker, starts a new lap.
Bottom (long) = show lap time list window, this does not stop a running timer.
Note: In the Lap Window the top and bottom buttons scroll through the list of lap times (if there are more than a window full of laps) and the left and middle button exits the window (back to the last timer window). Long top and bottom presses move to the start and end of the list.
Every button press causes a short vibration to give an assurance that it has been effective - the stop button gives a longer vibration to distinguish it. The screen view can be changed at any time without effecting the timing. In all but the lap list window, all the buttons perform the same function. In the lap list window, the left button is used to exit the window and the top/bottom right buttons scroll through the list. Up to 100 laps can be saved.
Press the left exit button once to show the exit screen with a summary of the workout; maximum, minimum and average lap time is displayed along with the count of laps recorded.
Encouragement welcome:
1Pxc5NtxhozH1NYke4ehFtEQsC836XMUAa
This is just the standard Sports Timer Stopwatch V2 with defaults I find useful for swimming, i.e. starts with the large font display, one minute vibration set and auto-lapping on.
Batman & Robin - Comic Cover - By CoreyD
Minnesota Vikings, analogue clock with date.
Created with: http://watchface-generator.de/
Russian text watchface.
Used custom font optimized for pebble.
No need in special firmware.
Already published in pebble store (search for "polvtorogo")
=== It's a WATCHFACE, not an APP! ===
A watchface which acts just like a simple stopwatch.
I need an easy-to-use stopwatch, so I wrote it. It helps me a lot when I'm making tea. I hope it can be helpful to you, too!
Usage:
- To start, just switch to this watchface
- To pause / resume, just shake it left or right.
- To reset, just switch to any other watchface, and then switch back again
- It will count until 99'59", and then return to 00'00"
If you are exercising and keep shaking your hands, I also prepared the non-pausable version for you.
Please let me know if you have any suggestion.
TODO:
- Configuration page to enable / disable the pause feature.
If you like my work, please consider to donate. Thank you!
BTC: 175EPbhA8AptH9pWrp47Z6cUKBWoMvUFia
Non-pausable version for sports.
The Japanese (Romanji) version of the Pebble Text Watch project. This version shows hours (ji) and minutes (fun) in romanji text, just as you would speak it in Japanese. Just add "Ima" to the beginning and "desu" to the end and you'll have a complete sentence. For example, "Ima, kyu ji san ju nana fun desu" translates to "It's now nine thirty-six". All the Japanese words between "Ima" and "desu" are provided by the watchface.
*This is a particularly useful watchface if you are learning Japanese! \(^u^ )/
Here's another photo: http://github.com/AlexanderPico/PebbleTextWatch/blob/japanese/dist/photo.jpg
This app will keep you to up to date on your next upcoming bus. It periodically updates itself so it will always have the latest information for you. In a quick glance, you can check the current time and when your next bus will arrive.
This uses the OC Transpo open data API and the Travvik framework to serve the data.
Quick how to.
Short presses on the Action button will move the selection arrow to either bus or stop numbers. The left is the bus and the right is the stop.
Long press on the Action button tells the app to immediately grab the information. Long press of the Action bar will also change the current direction the app is set to as OC Transpo combines both route directions into a single bus & stop tuple.
The up and down buttons increment and decrements the numbers so you can select the bus you want to keep tabs on.
- Base on Boss by zalewszczak
- Adjust a little bit
- Run on SDK 2.0
- No configuration required
- make date easy to read
http://tigerkidshop.com
Simple. Easy. Classy analog watch including date, connection and battery status indicators. Watchface inverts and vibrates on connection lost.
Created by http://www.watchface-generator.de/
Vibriert bei Verbindungsabbruch, Watchface wird dann invert
Tag, Monat und Jahr
simple, paper
Features:
- Gregorian & Jewish date
- Moon phase
- Number of Zman/jewish hour, and time until next
- Sun/Day Graph
- Sunrise (Netz), mid-day(Hatzot) & Sunset (Skhia)
- Mincha Alerts (vibration and message) for Mincha Gdola, Ktana, Plag & 18 mn before Shkia/Sunset.
- Battery and Bluetooth status, vibrates if Bluetooth connection is lost.
24 & 12hr analogue face with date and digital
The original concept for mypebblefaces.com was based on RichardG's AWSOME Pebble Concepts site.
Thanks to Otto Greenslade (Chaotic) @chaotictm for the Pebble Watch artwork and many thanks to the Pebble team @pebble for the watch that we all love.
Our Terms and Conditions | Cookies Policy | Any problems contact admin at mypebblefaces dot com
This website has been created,administrated and hosted free of charge by Jason @slayer1551 of NMC Design and Print. NMC Design and Print is a social enterprise working for the benefit of The Neuromuscular Centre @nmcentre Winsford, Cheshire, UK. If you would like contribute to the site please consider making a donation below which will go towards funding the servers as the site grows and any left over will go to the NMC Charity!
For more information please visit www.nmcentre.com



































