MyPebbleFaces will be closing down on the 1st of June.
TZplus2 - [SDK 2.0 compatible] display 3 timezones
Description
TZplus2 - a Pebble watchapp that displays 3 selectable timezones
[ SDK 2.0 compatible version ]
NOTE: to allow full use of the buttons, TZplus2 loads as an app (at the same menu level as "Settings" on the Pebble), not as a watchface . . . it just displays a watchface
Features (v2.2):
- select and display three timezones, plus local time, selectable on-the-fly
(no recompile required) from a picklist of locations and timezones
- toggle between showing timezone #1 & local time in upper time slot
- uses local time to determine offset from UTC on all displays
- displays nighttime as white characters on black background & daytime as
black characters on white background
- displays +/- 1 to indicate that a particular timezone display is 1-day ahead
or 1-day behind UTC
- displays 12/24 hour format time (using current Pebble Settings)
- preference settings are maintained in persistent storage
Operating instructions:
- to turn backlight on/off (automatically turns off after 4-seconds), either press
"select" (middle) button, or tap/shake
- to toggle between local time and timezone 1 display in the upper slot,
double-click the "select" button (when "set mode" is NOT active)
- to enter "set mode" (local), long-press the "select" (middle) button (upper slot
displays local time, blinks "LOCAL" for 2-seconds, then the currently selected
local timezone blinks)
- with "set mode" on "local", press the "up" & "down" buttons to change the
local timezone (note that the hour & minute displayed for local time may
temporarily change for a second, but will then return since this time
corresponds to either the time sync'd from your phone or the time set in the
Pebble's Settings: Date & Time menu)
- to change "set mode" to "timezone 1", press the "select" button (upper slot
displays timezone 1 time, blinks "TIMEZONE 1" for 2-seconds, then the
currently selected timezone 1 blinks)
- with "set mode" on "timezone 1", press the "up" & "down" buttons to change
timezone 1 (note that the time for timezone 1 will adjust in sync with the
selected timezone to reflect the offset from UTC, taking into consideration the
local offset from UTC selected earlier)
- to change "set mode" to "timezone 2", press the "select" button (the currently
selected timezone 2 blinks in the middle slot)
- with "set mode" on "timezone 2", press the "up" & "down" buttons to change
timezone 2 (note that the time for timezone 2 will adjust in sync with the
selected timezone to reflect the offset from UTC, taking into consideration the
local offset from UTC selected earlier)
- to change "set mode" to "timezone 3", press the "select" button (the currently
selected timezone 3 blinks in the lower slot)
- with "set mode" on "timezone 3", press the "up" & "down" buttons to change
timezone 3 (note that the time for timezone 3 will adjust in sync with the
selected timezone to reflect the offset from UTC, taking into consideration the
local offset from UTC selected earlier)
- to change "set mode" to "local", press the "select" button (upper slot displays
local time, blinks "LOCAL" for 2-seconds, then the currently selected local
timezone blinks)
- to exit "set mode" at anytime, long-press the "select" button (nothing blinking)
Mark J Culross (KD5RXT) [email protected]
Chrono2
Description
Chrono2: A "sweep analog" watchface with a smooth second hand
[ SDK 2.0 compatible version ]
This watchface was created from the combination of the Brains watchface from the SDK 1.0 and the simple_analog watchface provided as an exmaple with the SDK 2.0
Mark J Culross (KD5RXT) [email protected]
DblTime2
Description
DblTIme2 - display two timezones
[ SDK 2.0 compatible version ]
NOTE: to allow full use of the buttons, DblTime2 loads in as an app (at the same menu level as "Settings" on the Pebble), not as a watchface . . . it just displays a watchface
Features (v 2.2):
- dual date & time displays
- with black-on-white for daytime displays & white on black for nighttime displays
- adjustable # hours offset (-23:30 to +23:30) in 30-minute increments, between primary & secondary time displays (default = 0:00)
- when # hours offset = 0, secondary date & time are not displayed (primary time display only)
- enable/disable snooze mode (display blanks after 10 seconds) - default = enable
- enable/disable hourly chime mode (buzzes on the hour & activates display) - default = disable
- selectable mm/dd/yy vs dd/mm/yy date display - default = mm/dd/yy
- enable/disable display of seconds - default = enable
- displays 12/24 hour format time (using current Pebble Settings)
- minimal delay when showing time at start-up & when waking from snooze
- preference settings saved in persistent storage
Operating instructions:
- to enter "set mode" (snooze), long-press the "select" (middle) button (Z's blink)
- with "set mode" on "snooze", press the "up" & "down" buttons to toggle between "enable" & "disable"
- to change "set mode" to "chime", long-press the "select" button (bell blinks)
- with "set mode" on "chime", press the "up" & "down" buttons to toggle between "enable" & "disable"
- to change "set mode" to "month-day", long-press the "select" button (M/D blinks)
- with "set mode" on "month-day", press the "up" & "down" buttons to toggle between mm/dd/yy & dd/mm/yy
- to change "set mode" to "display seconds", long-press the "select" button (S blinks)
- with "set mode" on "display seconds", press the "up" & "down" buttons to toggle between "enable" & "disable"
- to change "set mode" to "offset", long-press the "select" button (TZ blinks)
- with "set mode" on "offset", press the "up" & "down" buttons to adjust the offset value by 30-minute increments
- with "set mode" on "offset", press the "select" button to force the offset back to 0
- to exit "set mode", long-press the "select" button (nothing blinking)
- with "snooze" mode activated (display blank), press the "up" or "down" buttons to repaint the display
Mark J Culross (KD5RXT)
[email protected]
WordTime2 - [SDK 2.0 compatible] a customized version of the Pebble Textwatch for my wife
Description
WordTime2 - a customized version of the Pebble Textwatch for my wife
[ SDK 2.0 compatible version ]
NOTE: to allow full use of the buttons, WordTime loads in as an app (at the same menu level as "Settings" on the Pebble), not as a watchface . . . it just displays a watchface
Features (v 2.2):
this app/watchface is based upon the original Pebble TextWatch, but modified to meet some new requirements as requested by my wife (fix minor logic errors & remove all animations) for the new Pebble that I gave her for her birthday !!
credit & thanks to sethadam1 for posting his source on github (which is what I started with for this project)
credit & thanks to sethadam1 also for the idea of a "debug mode", which I further extended by providing a means to selectively enable/disable it on-the-fly for demo and/or testing purposes
Operating instructions:
to enter "debug mode", long-press the "select" (middle) button (hour is capitalized)
with "debug mode" on, press the "up" & "down" buttons to advance or retard the time by one minute
with "debug mode" on, press & hold the "up" & "down" buttons to advance or retard the time by one minute repeatedly
to exit "debug mode", long-press the "select" (middle) button (hour is all lowercase)
Mark J Culross (KD5RXT) [email protected]
Ricochet2: [SDK 2.0 compatible] a very simplistic watchface showing time, date, & battery level
Description
Ricochet2: a very simplistic watchface showing time, date, & battery level
[ SDK 2.0 compatible version ]
Time & day/date float around the screen (a la Roomba style) in a semi-random fashion, "bouncing" off the edges of the screen & "ricocheting" off of each other.
NOTE: to allow full use of the buttons, ScrSaver loads in as an app (at the same menu level as "Settings" on the Pebble), not as a watchface . . . it just displays a watchface
Features (v 2.2):
selectable white-on-black or black-on-white display
selectable date-on-top or time-on-top display mode
selectable 12/24 hour format time
selectable mm/dd/yy or dd/mm/yy format date
preference settings are maintained in persistent storage
continuously shows battery % level ("+" in front indicates charging)
Operating instructions:
to toggle between black-on-white & white-on-black displays, long-press the "select" button
to toggle between date-on-top & time-on-top display mode, double-click the "select" button (also freezes the display for 4-seconds)
to toggle between 12/24 hour format time, press the "down" button
to toggle between mm/dd/yy & dd/mm/yy date format, press the "up" button
to turn backlight on/off (automatically turns off after 4-seconds), either press "select" button, or tap/shake (also freezes the display for 4-seconds)
Mark J Culross (KD5RXT) [email protected]
