Description

NOTE: to allow full use of the buttons, DblTime
loads in as an app (at the same menu level
as "Settings" on the Pebble), not as a
watchface . . . it just displays a watchface

NOTE2: until a new version of the SDK exposes
functions for doing so, applications (including
this one) currently have no means to
save/restore settings . . . each time you start
DblTime, it will always revert to initial defaults
. . . as soon as functions are provided by the
SDK that allow apps to save/restore settings,
DblTime will be updated to take full advantage
of them !!

Features (v 1.6):
- dual date & time displays
- with black-on-white for daytime displays &
white-on-black for nighttime displays
- adjustable # hours offset (-23:30 to +23:30) in
30-minute increments, between primary &
secondary time displays (default = 0)
- when # hours offset = 0, secondary date & time
are not displayed (primary time display only)
- enable/disable snooze mode (display blanks after
10 seconds) - default = enable
- enable/disable hourly chime mode (buzzes on the
hour & activates display) - default = disable
- selectable mm/dd/yy vs dd/mm/yy date display -
default = mm/dd/yy
- enable/disable display seconds display- default =
enable
- displays 12/24 hour format time (using current
Pebble Settings)
- eliminated delay when showing time at start-up &
when waking from snooze

Operating instructions:
- to enter "set mode" (snooze), long-press the "select"
(middle) button (Z's blink)
- with "set mode" on "snooze", press the "up" &
"down" buttons to toggle between "enable" &
"disable"
- to change "set mode" to "chime", long-press the
"select" button (bell blinks)
- with "set mode" on "chime", press the "up" & "down"
buttons to toggle between "enable" & "disable"
- to change "set mode" to "month-day", long-press
the "select" button (M/D blinks)
- with "set mode" on "month-day", press the "up" &
"down" buttons to toggle between mm/dd/yy &
dd/mm/yy
- to change "set mode" to "display seconds",
long-press the "select" button (S blinks)
- with "set mode" on "display seconds", press the
"up" & "down" buttons to toggle between "enable"
& "disable"
- to change "set mode" to "offset", long-press the
"select" button (TZ blinks)
- with "set mode" on "offset", press the "up" & "down"
buttons to adjust the offset value in 30-minute
increments
- with "set mode" on "offset", press the "select" button
to force the offset back to 0
- to exit "set mode", long-press the "select" button
(nothing blinking)
- with "snooze" mode activated (display blank), press
the "up" or "down" buttons to repaint the display

Mark J Culross (KD5RXT)
[email protected]

Update History

No update history found.